1/0 Malemute Aluminum Conductor Duplex Overhead Service Drop Cable
1/0 Malamute Aluminum Conductor Duplex Overhead Service Drop Cable is designed to deliver efficient and reliable power in overhead secondary distribution networks. Constructed with stranded aluminum conductors, the duplex configuration provides a combination of electrical conductivity, mechanical strength, and installation flexibility.
The 1/0 Malamute size is suitable for typical service drop spans, offering dependable load capacity with controlled sag under varying weather conditions. Aluminum construction reduces overall cable weight, simplifies handling, and enhances corrosion resistance for long-term outdoor use.
Produced under strict quality management systems, the 1/0 Malamute Aluminum Conductor Duplex Overhead Service Drop Cable meets utility and ASTM standards, making it a trusted solution for modern overhead service installations requiring safety, durability, and consistent performance.
Construction
Technical Specifications
Quality Control
Application
Construction
1/0 Malemute Aluminum Conductor Duplex Overhead Service Drop Cable Constrution
Standard
• ASTM B-230 Aluminum Wire, 1350-H19 for Electrical Purposes.
• ASTM B-231 Aluminum Conductors, Concentric-Lay-Stranded.
• ASTM B-232 Aluminum Conductors, Concentric-Lay-Stranded, Coated Steel Reinforced (ACSR).
• ASTM B-399 Concentric-Lay-Stranded 6201-T81 Aluminum Alloy Conductors.
• ICEA S-76-474-Neutral-supported Power Cable Assemblies With Weather-Resistant Extruded Insulation Rated 600Volts
• ASTM B-231 Aluminum Conductors, Concentric-Lay-Stranded.
• ASTM B-232 Aluminum Conductors, Concentric-Lay-Stranded, Coated Steel Reinforced (ACSR).
• ASTM B-399 Concentric-Lay-Stranded 6201-T81 Aluminum Alloy Conductors.
• ICEA S-76-474-Neutral-supported Power Cable Assemblies With Weather-Resistant Extruded Insulation Rated 600Volts
Phase Conductor
Stranded compacted circular aluminum
Insulation
XLPE(UV-resistant)
Messenger Conductor
AAC/AAAC/ACSR
Application
Aluminum Conductor Duplex Overhead Service Drop Cable is designed for use to supply 120-volt aerial service for temporary service at construction sites, outdoor or street lighting. For service at 600 volts or lower at a conductor temperature of 90°C maximum.
Application Type
1/0 malemute aluminium overhead cables, 1/0 malemute overhead aluminum wire, 1/0 malemute two conductor cable, 1/0 malemute 2 conductor power cable, 1/0 malemute two conductor, 1/0 malemute aluminum drop, 1/0 malemute overhead service drop conductors, 1/0 malemute overhead service conductors.
Technical Specifications
1/0 Malemute Aluminum Conductor Duplex Overhead Service Drop Cable
1/0 Malemute Aluminum Conductor Duplex Overhead Service Drop Cable
| Rated voltage | kV | 0.6/1 |
| Test voltage | Veff kV/Hz | 4/50 |
| Laying temperature | °C | min. -5 |
| Operating temperature | °C | -30 ~ +90 |
| Conductor temperature | °C | max. +90 |
| Short-circuit temperature | °C/s | max. +250 /5 |
| Bending radius (min.) | mm | 20 × Ø of cable |
Quality Control
1/0 Malemute Aluminum Conductor Duplex Overhead Service Drop Cable
Raw Material Test
Raw Material Test is the first quality checkpoint for the 1/0 Malamute Aluminum Conductor Duplex Overhead Service Drop Cable. Aluminum materials are examined for purity, conductivity, tensile strength, and elongation properties. Surface finish and dimensional tolerances are verified to ensure smooth processing during wire drawing. All raw materials are recorded and traceable throughout production. Only approved aluminum materials that meet specification limits proceed to manufacturing, ensuring consistent quality in the finished cable.
Process inspection
Process Inspection monitors each manufacturing step of the 1/0 Malamute Aluminum Conductor Duplex Overhead Service Drop Cable. Wire drawing parameters are tightly controlled to maintain uniform diameter and mechanical properties. During stranding, conductor alignment, lay ratio, and tension balance are inspected. Continuous in-process checks ensure conductor integrity, flexibility, and electrical consistency.
Finished Product
Finished Product Test verifies that the completed 1/0 Malamute Aluminum Conductor Duplex Overhead Service Drop Cable meets all requirements. Electrical resistance testing confirms conductivity, while mechanical tests validate tensile strength. Final inspections include dimensional checks, surface condition evaluation, marking accuracy, and packaging integrity to ensure safe delivery and installation readiness.
Application
Ideal for overhead service drop installations delivering secondary power to residential, commercial, and light industrial service entrances.
Technical Advantages
● 30+ years of manufacturing experience
● ISO and UL certified production
● Customized cable and transformer solutions
Product Packaging
Wires and Cables packaging (1)
Wires and Cables packaging (2)
Wires and Cables packaging (3)
Wires and Cables packaging (4)
Wires and Cables packaging (5)
Wires and Cables packaging (6)
Wires and Cables packaging (7)
Wires and Cables packaging (8)
Related Products
0361TQ BS 638 Orange Welding Cable
The 0361TQ BS 638 Orange Welding Cable is a premium, heavy-duty flexible welding cable engineered for demanding welding and high-current applications. It features finely stranded class 5 bare copper conductors for exceptional flexibility and high conductivity, EPR (ethylene propylene rubber) insulation for superior dielectric strength and heat resistance (90°C continuous, 200°C short-term), and a tough chlorinated sulphonated polyethylene (CSP) or polychloroprene (PCP/neoprene) outer sheath in high-visibility orange providing excellent oil resistance, flame retardancy (IEC 60332-1), abrasion/tear resistance, and weatherproofing. Compliant with BS 638 standard and rated 450/750V, it supports high current loads, tight bending radii, and reliable performance in harsh industrial environments. The 0361TQ Orange is ideal for welding machines, electrode holders, earth returns, and portable power connections where durability, flexibility, visibility, and safety are essential.2Y-high-voltage-power-cable.webp)
A2XS(FL)2Y MDPE High Voltage 76/132 (145) kV Power Cable
The A2XS(FL)2Y MDPE High Voltage 76/132 (145) kV Power Cable is a single-core aluminum conductor cable with XLPE insulation and MDPE sheath, designed for high-voltage power transmission. Built in accordance with IEC 60840 standards, it provides excellent electrical performance, water resistance, and mechanical protection. Suitable for underground, underwater, indoor, outdoor, and duct installations, the cable features water-blocking tape that prevents water propagation inside, ensuring long-term reliability in power stations, industrial plants, and distribution networks. The A2XS(FL)2Y MDPE is widely used in major UHV transmission grids, underground/submarine lines, river crossings, offshore wind connections, and large-scale renewable energy projects where water ingress protection, efficiency, and ultra-reliability are essential.
4 Strombus Aluminum Conductor Triplex Overhead Service Drop Cable
4 Strombus Aluminum Conductor Triplex Overhead Service Drop Cable is designed for reliable overhead power distribution from utility lines to service entrances of residential, commercial, and light industrial buildings. This cable consists of two insulated phase conductors and one bare or insulated neutral messenger made from high-purity aluminum, ensuring excellent conductivity, reduced weight, and long service life. The 4 Strombus Aluminum Conductor Triplex Overhead Service Drop Cable is manufactured using precision stranding and advanced insulation extrusion technology, providing stable electrical performance and strong mechanical strength. The insulation material offers excellent resistance to weathering, UV radiation, moisture, and temperature fluctuations, making the cable suitable for long-term outdoor installation. To guarantee consistent quality, the 4 Strombus Aluminum Conductor Triplex Overhead Service Drop Cable undergoes a comprehensive testing system covering raw materials, production processes, and finished products. Each stage follows standardized testing procedures to ensure compliance with international standards and utility requirements. This cable is an ideal solution for cost-effective, safe, and efficient overhead service drop applications.
FR-N30XA8E-R 18/30kV Cable Gen to NF C 33-226 - Cu/XLPE/MDPE
The NF C 33-226 Cu-XLPE-MDPE 18/30kV Cable is a robust medium voltage power cable designed for safe and reliable energy transmission in fixed installations. It features a Class 2 stranded copper conductor, cross-linked polyethylene (XLPE) insulation, and a medium-density polyethylene (MDPE) outer sheath, ensuring outstanding electrical conductivity, insulation integrity, and mechanical protection. Complying with NF C 33-226, IEC 60502-2, and EN 60228, this cable is ideal for power distribution in industrial plants, substations, municipal grids, and commercial facilities. It provides excellent resistance to water (AD7) and UV radiation (ISO 4892), while being halogen-free (IEC/EN 60754-1) to ensure environmental and operational safety. With a voltage rating of 18/30 (36)kV and maximum operating temperature of 90°C, the Cu-XLPE-MDPE construction guarantees stable, efficient, and long-lasting performance in medium- and high-voltage networks.
H05V-U H05V-R H05V-K
H05V-K cable is used for the internal wiring of electric motors and transformers as well as other electrical appliances and lighting applications. It can be used in and at electronic appliances for measuring, regulating and controlling. The cables are also ideal for laying in pipes, surface wiring and conduit installations. Specifications according to HD 516 apply for respective specific applications. H05V-U cable is intended for the installation to the inside of apparatus as well as for the protective laying to the lightings, in dry rooms, in production facilities, switch and distributor boards, in tubes, under and surface mounting of plasters. H05V-R is preferably for installation indoors, in cable ducts and in industrial plants or switching stations, under ground installation. Can be used in switchboards and distributor boards or where a thicker strand of multi-wire is required.Found in electronic and electrical equipment and switch gear cabinets designed for export to a European country and for MRO replacement of European made equipment wire.
(N)TSCGECEWOU 3.6/6kV and 6/10kV ATB Cable
The (N)TSCGECEWOU 3.6/6kV and 6/10kV ATB Cable is a flexible, heavy-duty medium-voltage trailing/reeling cable with anti-torsion braid (ATB) for superior torsional stability in extreme mining conditions. It features class 5 finely stranded tinned copper phase conductors for flexibility and corrosion resistance, semi-conductive conductor and insulation screens, EPR insulation for high dielectric strength and 90°C rating, copper wire braid screen for EMI/grounding, control conductors, monitoring conductor (ÜL), anti-torsion polyester braid for reduced twisting under dynamic loads, and a tough rubber outer sheath resistant to oil, flame, abrasion, and mechanical stress. Compliant with DIN VDE 0250, it handles high tensile forces, fast reeling, and tight bends while providing EMC protection. The (N)TSCGECEWOU ATB ensures safe, reliable MV power to mobile equipment like draglines, shovels, and tunnel boring machines in harsh opencast/underground environments.FAQ From Customers
-
What are the advantages of power cables and overhead lines?(1) Reliable operation, because it is installed in a hidden place such as underground, it is less damaged by external forces, has less chance of failure, and the power supply is safe, and it will not cause harm to people; (2) The maintenance workload is small and frequent inspections are not required; (3) No need to erect towers; (4) Help improve power factor.
-
Which aspects should be considered when choosing the cross section of a power cable?(1) The long-term allowable working current of the cable; (2) Thermal stability once short circuited; (3) The voltage drop on the line cannot exceed the allowable working range.
-
What are the measures for cable fire prevention?(1) Use flame-retardant cables; (2) Use fireproof cable tray; (3) Use fireproof paint; (4) Fire partition walls and fire baffles are installed at cable tunnels, mezzanine exits, etc.; (5) Overhead cables should avoid oil pipelines and explosion-proof doors, otherwise local pipes or heat insulation and fire prevention measures should be taken.
-
What should be paid attention to during the transportation and handling of cables?(1) During transportation, loading and unloading, cables and cable reels should not be damaged. It is strictly forbidden to push the cable reels directly from the vehicle. Generally, cables should not be transported and stored flat. (2) Before transporting or rolling the cable reel, ensure that the cable reel is firm, the cable is wound tightly, the oil pipe between the oil-filled cable and the pressure oil tank should be fixed without damage, the pressure oil tank should be firm, and the pressure indication should meet the requirements.
-
What inspections should be carried out for the acceptance of cable lines?(1) The cable specifications should meet the regulations, the arrangement should be neat, no damage, and the signs should be complete, correct and clear; (2) The fixed bending radius of the cable, the related distance and the wiring of the metal sheath of the single-core power cable should meet the requirements; (3) The cable terminal and the middle head should not leak oil, and the installation should be firm. The oil pressure of the oil-filled cable and the meter setting should meet the requirements; (4) Good grounding; (5) The color of the cable terminal is correct, and the metal parts such as the bracket are completely painted; (6) There should be no debris in the cable trench, tunnel, and bridge, and the cover should be complete.
Welcome your inquiry
Honesty, Integrity, Frugality, Activeness and Passion