2-Layer 15kV ACSR/AAC Tree Wire - Covered Overhead Distribution Cable

Raw Material Test is the critical first step in manufacturing the 2-Layer 15kV ACSR/AAC Tree Wire. Incoming aluminum rods (for AAC) or aluminum and steel wires (for ACSR) undergo detailed chemical composition analysis to confirm purity and alloy requirements per ASTM B230/B231/B232. Mechanical testing verifies tensile strength, elongation, and hardness. HDPE or XLPE covering compounds are rigorously tested for thermal stability, tracking resistance, dielectric strength, and weatherability. Surface quality inspection and dimensional measurements detect any defects or inconsistencies. Only raw materials that fully pass every stringent criterion are approved for stranding and extrusion in the production of the 2-Layer 15kV ACSR/AAC Tree Wire. This thorough incoming inspection guarantees consistent conductivity, mechanical strength, and superior covering performance for reliable overhead tree wire applications.

Process Inspection during manufacturing of the 2-Layer 15kV ACSR/AAC Tree Wire maintains precise control at every stage. After conductor stranding (AAC or ACSR), continuous monitoring verifies dimensional tolerances and surface quality. The dual-layer covering extrusion process is carefully controlled for uniform thickness of both inner and outer layers, ensuring strong adhesion and absence of voids. Online diameter measurement systems and frequent visual checks prevent defects such as uneven covering or imperfections. Key process parameters including temperature, speed, and extrusion pressure are strictly logged. Mid-process sampling includes partial discharge and mechanical tests. Any deviation triggers immediate corrective action. These rigorous in-process controls safeguard the structural integrity and electrical properties of the 2-Layer 15kV ACSR/AAC Tree Wire, delivering a high-quality covered conductor ready for demanding overhead distribution service.

Finished Product testing ensures every reel of 2-Layer 15kV ACSR/AAC Tree Wire meets the highest quality standards. Comprehensive dimensional verification confirms overall diameter, covering thickness, and conductor stranding. DC resistance, high-voltage AC, and partial discharge tests validate electrical performance. Mechanical tests measure tensile strength and elongation. Full visual and tactile inspections check for surface defects or covering imperfections. Tracking and weathering resistance tests are performed on covering samples. All examinations follow ICEA S-121-733 and ASTM standards with detailed records for full traceability. Packaging and marking accuracy are also verified. Only the 2-Layer 15kV ACSR/AAC Tree Wire that successfully passes 100% of these final inspections receives approval for shipment. This rigorous final quality gate assures customers of outstanding dielectric strength, tracking resistance, and reliable performance in tree-prone overhead distribution lines.